Silverfast hdr 9 manual#
Silverfast hdr 9 full#
Silverfast hdr 9 software#
Silverfast hdr 9 iso#
Silverfast hdr 9 plus#

The 16 bits per channel output from the Ai Studio version is available for the file formats that support 16 bits: TIFF, PSD and JP2. SilverFast internally uses the 48 bits of the input and also outputs the final image with 48 bits. SilverFast internally uses the 48 bits of the input and reduces to 24 bits for the final image. This setting reflects that SilverFast fetches the maximum data (48 bits total, 16 bits per channel) from the scanner, processes it in 48-bit and then outputs the image with a total of 24 bits (8 bits for each of the three color channels Red, Green and Blue). For digital images that are not going to be edited further, 24-bits is the most common color depth.Д¤8>24bit is the standard setting in SilverFast. Once the settings are to your satisfaction, output the images with a 24-bit color depth for an 8 bits per color channel.

Silverfast hdr 9 full#

If you wish to continue editing your images after scanning, select 48-bit color depth for 16-bits per color channel so that you can also still access the full range of color gradations later on. SilverFast therefore handles your images with 16-bits per channel. All versions offer 16bit for raw data scans, but only Ai Studio allows both 16bit raw data and 16bit for processed images.ДЎ6-bit data provides a higher range of color gradations (65536 per color channel) in comparison to 8-bit data (256 color channel). Depending on the SilverFast version, an output with 16bit per channel or with 8bit per channel is then possible. SilverFast always uses the largest possible color depth that a scanner offers and also uses this for internal calculations.

If only one value is present, the input color depth corresponds to the output color depth. SilverFast displays the input values to the left and the output values to the right of the arrows. The greater the color depth the larger the resulting file. This delivers the different color depths that can be set in SilverFast. Black and white images are managed with one channel with 8-bit or 16-bit data. Color images are comprised of the three color channels R(ed), G(reen) and B(lue), each with 8-bit data or 16-bit data. The color depth describes the number of bits per channel. Select the color depth as the final step before the preview scan. Open the dialog's Expert section by clicking on the mortarboard.

In the Expert section of the dialog in Ai Studio, you can also edit the profiles or create your own profiles. If you film type is not listed, select a similar film type or use the standard profile: When using our HDR and HDRi raw data formats, this information is saved for later processing. This ensures that the orange mask of your film strip is correctly removed during its transformation from negative to positive.

Silverfast hdr 9 iso#

In the Negafix dialog you can choose a film from a wide selection of manufacturers and different film typed with different ISO values. If you have selected the 'Negative' setting to scan your negatives, the Negafix dialog will have opened simultaneously as an additional tool. The selection automatically loads a special color profile which prevents the usual blueness that Kodachrome images would otherwise acquire when scanned without this special feature. Select 'Kodachrome' for the special slide film from Kodak - often identified by the 'card frame'. 'Positive' is the setting used for the normal positive slides.

Silverfast hdr 9 plus#

Next, select either positive, negative or Kodachrome the 'Kodachrome' setting being reserved for the SE Plus and Ai Studio versions only).

Silverfast hdr 9 software#

On some film scanners, the film holder type can be selected in the software instead. On a pure film scanner, it is only possible to scan transparent material and the Reflective mode is not available. Kodachrome and Negatives are found by clicking on the 'Positive' icon.) For transparency scans on a flatbed scanner, it is important to remove the cover of the transparency unit. (Transparency is found by clicking on the 'Reflective' icon and selecting from the drop down menu. Select 'Transparency' for scanning slide positives, Kodachrome images and negatives, either framed or on film strips. In this case, 'Reflective' refers to the scanning of photos on paper.

Silverfast hdr 9 manual#

If you see the blue Workflow Pilot symbol after startup, click on it to change to Manual mode (red icon).ДЄ flatbed scanner with a transparency unit gives you a choice between transparency and reflective scans. These instructions refer to Manual mode in SilverFast, which you can recognize by the red icon of the Workflow Pilot. SilverFast has a series of settings that you should define before launching the preview scan. Lower versions offer a smaller scope of settings so that description may differ from what you see on your screen.) (The example pictures are taken from the Ai Studio version. Which are standard or basics settigs that I should apply for every image?